Allen-Bradley 2755 Bedienungsanleitung PDF herunterladen (Seite 2)

Publication

2755-2.63

The following Allen-Bradley software is needed to use the procedure

described in this application note:

• Bulletin 6200 development software for the PLC-5, to run in the

personal computer

• Terminal Emulation software for a personal computer, to

configure the 2760-RB

• 2755-ASN W

indows-Based Of

fline Program Software to

configure the AdaptaScan reader

This document refers to the following publications, which should be

available for reference while working through this application note:

Publication Number Title

1785-XXX User Manual for your PLC-5

6200-XXX Programming Manual for your PLC-5

2755-837 AdaptaScan Bar Code Readers Installation Manual

2755-838 AdaptaScan Configuration Software User Manual

2760–ND001 2760–RB User Manual

2760-2.16 2760-SFC1 Protocol Cartridge Manual

2760-2.19 2760-SFC2 Protocol Cartridge Manual

Use the following table as a configuration guideline when using the

examples shown in this document.

2760-RB In Use

PLC-5, -15, -25,

etc.

New Generation PLC-5

(Series A, Rev. C or above only)

Series A, Rev

. G or

below

Follow example

PLC program as

Set BT Compatibility Bit S26/4 while in

program mode. Use example PLC program

shown on page 9.

Series A, Rev H or

Above

PLC program as

shown on page 9.

Add ladder logic using IIN update of RB.

BTR must be before ‘BTW. Refer to

page 10.

Software Requirements

Related Publications

PLC 5 Compatibility

1 2 3 4 5 6 7 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Allen-Bradley 2755 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern