Allen-Bradley 2755 Bedienungsanleitung

Publication 2755-2.63AdaptaScan Reader to a PLC-5Using RS-232/ASCII Protocol withthe 2760–RB Module and the 2760-SFC1 and -SFC2Protocol CartridgeThe A

10Publication 2755-2.63Using the 2760-RB, Revision H or Above, with the NewGeneration PLC5When the 2760-RB, Revision H or above, is used with the N

11Publication 2755-2.63CablingCable 1 must be constructed to connect a configuration terminal tothe 2760-RB Module Configuration port.Cable 2 must

PLC-5 is a registered trademark of Allen-Bradley Co., Inc., a Rockwell International CompanyAdaptaScan, PLC-5/30, PLC-5/40 and PLC-5/60 are trademarks

2Publication 2755-2.63The following Allen-Bradley software is needed to use the proceduredescribed in this application note:• Bulletin 6200 develop

3Publication 2755-2.63The 2760-RB configuration example includes sample configurationscreens and DIP switch settings needed to establish communicat

4Publication 2755-2.63PLC-5 ProgramThe sample ladder logic listing below instructs the PLC-5 to:Rung 2:0 – Read AdaptaScan data from the RB module

5Publication 2755-2.63Configuring the 2760-RB1. Set all 2760-RB module DIP switches to Off.2. Connect the smart cable to the Configuration port of

6Publication 2755-2.632755-SN3, -SN5, -SN8 AdaptaScan Reader ConfigurationThe AdaptaScan Offline Programmer configuration shows only thescreens nee

7Publication 2755-2.63The Serial Port dialog defines communication parameters (RS-232/RS-485/ RS-422) and protocols (ASCII, DH-485, DF1) for therea

8Publication 2755-2.63The Message dialogs define the format and content of message datasent to the host by the reader when bar codes are decoded. T

9Publication 2755-2.63And when Edit is selected in the Message Field screen, this dialogappears:A sample PLC program appropriate for using a PLC 5/