Allen-Bradley 2-D Bedienungsanleitung PDF herunterladen (Seite 11)

ControlLogix™ Voltage/Current Input Module 11

Publication

1756-IN039D-EN-P - February 2003

2. Connect the insulated wires to:

· the RTB (as shown below) if the cable is grounded at the

field device.

· the field device if the cable is grounded at the chassis.

Spring Clamp RTB Cage Clamp RTB

20860-M

20859-M

1. Strip 7/16 inch (11mm) maximum

length of wire.

2. Insert the screwdriver into the

inner hole of the RTB.

3. Insert the wire into the

open terminal and

remove the screwdriver.

1. Strip 3/8 inch (9.5mm) maximum

length of wire.

2. Insert the wire into the open terminal.

3. Turn the screw clockwise to close the

terminal on the wire.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Allen-Bradley 2-D Bedienungsanleitung Seite 11